Zhengzhou Ruiyuan Machinery Manufacturing Co., Ltd.

The jaw crusher consists of two jaw plates, a movable jaw and a static jaw, forming a crushing cavity. It simulates the movement of the two jaws of an animal to complete the material crushing operation. It is widely used in the crushing of various ores and bulk materials in mining and smelting, building materials, highways, railways, water conservancy and chemical industries. The maximum compressive strength of the crushed material is 3. When the Henan Manlin Mechanical Jaw Crusher is working, the movable jaw plate makes periodic reciprocating motion to the fixed jaw plate, sometimes approaching and sometimes leaving. When approaching, the material is squeezed, split, and impacted between the two jaw plates and is crushed. When leaving, the crushed material is discharged from the discharge port by gravity, and the huge stones are broken into small stones. In the process, the first crusher is usually the main crusher. The longest and most robust crusher is the jaw crusher. When feeding the jaw crusher, the material is poured from the top inlet into the crushing chamber containing the jaw teeth. The jaw teeth push the material against the chamber wall with great force, breaking it into smaller stones. Supporting the movement of the jaw teeth is an eccentric shaft that runs through the fuselage frame. Eccentric motion is usually produced by flywheels fixed at both ends of the shaft. Flywheels and eccentric support bearings often use spherical roller bearings, and the bearings must withstand huge impact loads, abrasive sewage and high temperatures.